Аксесоари

 

Orbital Welding ORBIPURGE Complete Purging Kit

 

The ORBIPURGE Stopper Kit contains all you need for your external purging needs. The stoppers can be used purging and blanking of tubes and fittings. Two hollow plugs of each size are supplied as well as some smaller solid plugs for blanking. The kit is supplied in an attractive ABS case with a range of hose fittings for most applications. All plugs are made from white nylon and are lightweight and durable. The stoppers provided will cover most internal diameters between 12mm and 110mm. Larger diameters of Purge Stoppers are available individually on request. To ensure purge gas usage and times are kept to a minimum these stoppers should be used in conjunction with our ORB1001Oxygen Analyser.

Quick release fittings are supplied to enable the plugs to be easily fitted to the standard ORBIMATIC Purge Hose which is supplied with our Welding Systems.

The ORB1001 analyser will trace oxygen content down to 1 ppm and has the ability to be easily interfaced directly to the ORBIMAT C range of Power Supplies.

 

 

We can also supply a wide range of other weld purging and monitoring equipment tailored to suit your application and budget.The stoppers provided will cover most internal diameters between 12mm and 110mm. Larger diameters of Purge Stoppers are available individually on request. To ensure purge gas usage and times are kept to a minimum these stoppers should be used in conjunction with our ORB1001Oxygen Analyser.
 

 Quick release fittings are supplied to enable the plugs to be easily fitted to the standard ORBIMATIC Purge Hose which is supplied with our Welding Systems.The ORB1001 analyser will trace oxygen content down to 1 ppm and has the ability to be easily interfaced directly to the ORBIMAT C range of Power Supplies.We can also supply a wide range of other weld purging and monitoring equipment tailored to suit your application and budget.

 

ORBICAR Trolley

 The ORBICAR is a trolley with integrated water cooling system and
gas bottle rack.It is available without cooler as well.
 

 

 When using the orbital welding process, the most effective way to ensure a consistent and clean internal weld profile is use a back purge with a very low oxygen concentration. The only way to ensure that this oxygen concentration is low enough is to use an accurate measuring instrument.
In the past manual welders often used formulas with time, flow rate and volume which give very rough indications and which are not precise enough for many applications.
Even simple and low priced measuring units are no longer matching the requirements in Pharmaceutical, Biotechnology and Semiconductor Industry.
 

With the ORB 1001, ORBIMATIC has designed a system, which works with high precision
but nevertheless is very easy in operation and very economically priced.
Furthermore the ORB 1001 allows optionally interfacing with all ORBIMAT C power-sources
with several possibilities of process controlling as well as PC interfacing.