Спецификации
| Input voltages (± 10%) |
CSA | 200–240 V, 1-PH, 50–60 Hz OR 480 V, 3-PH, 50–60 Hz1 |
|---|---|---|
| CE/CCC | 230 V, 1-PH, 50–60 Hz OR 400 V, 3-PH, 50–60 Hz |
|
| Input current @ 6.5 kW |
CSA | 200–240 V, 1-PH, 39/32 A OR 480 V, 3-PH, 9.4 A1 |
| CE/CCC | 230 V, 1-PH, 33 A OR 400 V, 3-PH, 10 A |
|
| Output current | 10–45 A | |
| Rated output voltage | 145 VDC | |
| Duty cycle @ 40° C (104° F) |
CSA |
50% @ 45 A, 200–240 V, 1-PH |
| CE/CCC | 50% @ 45 A, 230 V, 1-PH 60% @ 41 A, 230 V, 1-PH 100% @ 32 A, 230 V, 1-PH 50% @ 45 A, 400 V, 3-PH 60% @ 41 A, 400 V, 3-PH 100% @ 32 A, 400 V, 3-PH |
|
| Open circuit voltage (OCV) | 275 VDC (200–240 V, CSA/CE/CCC and 480 V, CSA) 265 VDC (400 V CE/CCC) |
|
| Dimensions with handles | 442 mm (17.4″) D; 173 mm (6.8″) W; 357 mm (14.1″) H | |
| Weight with 6.1 m (20′) torch | CSA | 14 kg (31 lbs.) |
| CE/CCC | 15 kg (33 lbs.) | |
| Gas supply | Cutting: air (clean, dry and oil-free), nitrogen, F5 Gouging: air (clean, dry and oil-free), nitrogen, F5 Marking: air (clean dry and oil-free) argon |
|
| Recommended gas inlet flow rate/pressure |
188 I/min (400 scfh) @ 5,9 bar (90 psi) | |
| Input power cable length | 3 m (10′) | |
| Power supply type | Inverter – IGBT | |
| Engine drive requirement | 12.5 kVA (10 kW) for full 45 A output | |
| Electrical efficiency | 88% | |
| Recyclability | 100% | |
| Certifications | CSA certified for use in the Americas and Asia, except China. CCC for use in China. CE, RCM, GOST-TR, UkrSEPRO, and Serbian AAA for use in Europe, Australia, Belarus, Kazakhstan, Russia, Serbia, Ukraine, and other countries where accepted. | |
| Warranty | Power supply: 3-year Torch: 1-year |
|
1 For use in North America only.
Engine-driven generator operation
| Engine drive rating | System output current | Performance (arc stretch) |
|---|---|---|
| 10 kW | 45 A | Full |
| 8 kW | 45 A | Limited |
| 6 kW | 30 A | Full |
Cut capacity
| Capacity | Thickness | Cut speed |
|---|---|---|
| Cutting | ||
| Recommended | 16 mm (5/8″) 22 mm (7/8″) |
500 mm/min (20 ipm) 250 mm/min (10 ipm) |
| Severance (hand cutting) | 29 mm (1-1/8″) | 125 mm/min (5 ipm) |
| Pierce* | 12 mm (1/2″) | |
* Pierce rating for handheld use or with automatic torch height control.
| Capacity | Metal removal rate | Groove profile |
|---|---|---|
| Gouging | ||
| Typical gouge | 3,4 kg (7.5 lbs.) per hour | 3,2 mm (.12″) D x 6,8 mm (.26″) W |
Production cut chart
| Material | Thickness inches |
Current amps |
Production cut speed* ipm |
|
|---|---|---|---|---|
| Mild steel | 10 GA | 45 | 181 | |
| 1/4 | 45 | 72 | ||
| 3/8 | 45 | 38 | ||
| 1/2 | 45 | 24 | ||
| 5/8 | 45 | 16 | ||
| Stainless steel | 10 GA | 45 | 134 | |
| 1/4 | 45 | 59 | ||
| 3/8 | 45 | 29 | ||
| 1/2 | 45 | 19 | ||
| 5/8 | 45 | 13 | ||
| Aluminum | 1/8 | 45 | 263 | |
| 1/4 | 45 | 104 | ||
| 3/8 | 45 | 42 | ||
| 1/2 | 45 | 26 | ||
| 5/8 | 45 | 14 | ||
| Material | Thickness mm |
Current amps |
Production cut speed* mm/min |
|---|---|---|---|
| Mild steel | 3 | 45 | 5590 |
| 6 | 45 | 2110 | |
| 10 | 45 | 920 | |
| 12 | 45 | 690 | |
| 16 | 45 | 400 | |
| Stainless steel | 3 | 45 | 4725 |
| 6 | 45 | 1695 | |
| 10 | 45 | 870 | |
| 12 | 45 | 540 | |
| 16 | 45 | 320 | |
| Aluminum | 3 | 45 | 7120 |
| 6 | 45 | 3095 | |
| 10 | 45 | 1015 | |
| 12 | 45 | 745 | |
| 16 | 45 | 340 |
Bulgarian
Отзиви
Все още няма отзиви.